http://blue21.ddo.jp/man/man2html.html?lang=en&cmd=8+mdadm
- W, --write-mostly
subsequent devices lists in a --build, --create, or --add command will be flagged as 'write-mostly'. This is valid for RAID1 only and means that the 'md' driver will avoid reading from these devices if at all possible. This can be useful if mirroring over a slow link.
- write-behind=
Specify that write-behind mode should be enabled (valid for RAID1 only). If an argument is specified, it will set the maximum number of outstanding writes allowed. The default value is 256. A write-intent bitmap is required in order to use write-behind mode, and write-behind is only attempted on drives marked as write-mostly.
めも
未評価
